Azure Resource Manager templates offer you a declarative way of provisioning resources in the Azure cloud. Resource Manager templates define how resources should be provisioned. When provisioning resources on Azure with Azure Resource Manager, you want to be in control of which resources are deployed and you want to control their life span. To achieve this control, you need to standardize the templates and deploy then in a repeatable way. This can be done by managing your resource creation as Infrastructure as Code.

Definition of Infrastructure as Code
Infrastructure as Code is the process of managing and provisioning computing infrastructure and its configuration through machine-processable definition files. It treats the infrastructure as a software system, applying software engineering practices to manage changes to the system in a structured, safe way.

https://xpir.it/xprt5-iac

The characteristics of Infrastructure as Code are:

  • Declarative
  • Single source of truth
  • Increase repeatability and testability
  • Decrease provisioning time
  • Rely less on availability of persons to perform tasks
  • Use proven software development practices for deploying infrastructure
  • Idempotent provisioning and configuration.

 

In this article, I will explain how to create Azure infrastructure with versioned Azure Resource Manager templates (ARM templates). For the deployments, the VSTS Build and Release pipelines were used. The code or ARM templates are managed from a Git repository. Code in the Git repository can use the same practices as any other development project. By updating your code or templates, you can deploy, upgrade or remove your infrastructure at any time. The Azure portal will no longer be used to deploy your infrastructure because all ARM templates are deployed by deployments pipelines. This will give you full traceability and control over what is deployed into your Azure environment.

 

Deployment pipelines for deploying versioned ARM templates

If you have a large number of infrastructure resources, it is good to know what the exact footprint is. If you know this, you can easily redeploy and create test environments without the constant question: to what extent is this infrastructure the same as production? In order to obtain adequate control over your infrastructure, you can apply versioning to the deployments and their content. In this case, ARM templates in combination with VSTS can help you. When applying Infrastructure as Code this way, you can test an actual infrastructure deployment and develop new templates at the same time. To do this you need two deployment pipelines:

  • Deployment of the reusable ARM templates (see the article on Best Practices Azure Resource Manager templates)
  • Pipeline for deploying the resource base on the reusable ARM templates.

The templates used in the second pipeline are deployed in the first pipeline. These are called linked ARM templates. A linked ARM template allows you to decompose the code that deploys your resources. The decomposed templates provide you with the benefit of testing, reusing and readability. You can link to a single linked template or to a composed one that deploys many resources like a VM, or a complete set of PAAS resources.

 

Deployment pipeline for reusable linked ARM templates

The goal of this pipeline is to deploy a set of tested linked templates (a version) to a storage account from where they can be used. Each time you perform an update to the templates (pull request), a deployment pipeline is triggered (continuous integration), and once all tests are successful, a new version is deployed and ready to use. The new deployments exist side by side with the earlier deployment. In this way the actual resource deployments can use a specific version. The following figure provides an overview of the pipeline:

Build

The deployment starts with a pull request to the master branch of the Git repository. Then a new build is trigged. In this build pipeline, the sources are copied to a build artifact to be used in a release. In addition, a build number is generated that can be used as version number of the released templates.

Release

The release has several release steps to ensure that the ARM templates are tested before they are published. Templates are tested by deploying the resources. In the sample, all steps are an automatic process. When the tests succeed, the release continues with the deployment of the templates to the storage account where they can be used for the real infrastructure deployments.

Deploy test

The first step is to deploy to a test location on the storage account. This test location will be used to test the ARM templates. When you deploy the templates, this can also help you in debugging errors by running a test deployment from your local machine. The only task in the environment is to do an Azure Blob File Copy. All the linked templates (the artifact) are deployed to the Azure storage account.

Test ARM templates

During the second step the ARM templates can be tested. First you get a SAS token (link: https://pascalnaber.wordpress.com/2016/08/31/vsts-task-to-create-a-sas-token/) to access the storage account. The next step consists of deploying the ARM templates. This runs a test ARM template that covers the parameters. When the deployment fails, the pipeline is stopped (asserted). The last step consists of removing the resource group where you have deployed your test resources. If all steps succeed, the templates are approved for release. You can perform these steps multiple times for different types of resources and resource combination. When you perform this step N times, you can run them in parallel. If you split this into multiple templates, it is also clear where you have a problem if the step fails.

Deploy the production version

The last step will deploy the templates to a location where the build number is used in the naming convention. The task Azure Blob File Copy is the same as in the first step, only the location where the files are copied to is variable, depending on the build number. In this way the templates can be referenced by using the build number in the URL.

Pipeline for deploying the resource base on the reusable ARM templates

When all linked templates are deployed, they can be used to perform the deployments of your Azure infrastructure. In the sample pipelines, I have only one test environment, but the number of test environments can be different for each pipeline. One pipeline will deploy the resources of one Azure Resource group.

Build

The goal of the build is to produce an artifact of the templates that can be used in the release pipeline. The deployment starts with a pull request to the master branch of the Git repository. Then a new build is trigged. In this build pipeline, the sources are copied to a build artifact to be used in a release.

 

Release

The release pipeline will validate, test and then deploy the resource to the production environment. The templates in each environment are the same; the only difference is the parameter files. The parameter file can parameterize the sizes of the resources deployed in the different environments. The sizes must be chosen wisely in order to represent the production environment, but keep in mind the costs of running a test environment. In the main template, you keep a variable build, which you use to point to a specific release from the previous pipeline. In this way you can control the deployed version of your shared linked templates.

 

Validate templates

The first step consists of validating the templates for all environments. This is done by running a deployment in Validation Mode. Here, the template is compiled, it is checked to see whether it is syntactically correct and will be accepted by Azure Resource Manager. You have to do this for all environments to check whether the parameter files are correct. When the step succeeds, the deployment to test will start.

Release test

The goal of this step is to deploy and test the resource. If there is a need for a gatekeeper, approvals can be added at the beginning of this step. If not, the deployment of your test environment starts automatically. If possible, use the Deployment Mode option “Complete”. This ensures that the resources in the Azure Resource Group are the same as those defined in the ARM template. The action consists of 2 tasks. First create a SAS token for access to the Azure Storage. The next step performs the actual deployment. If everything succeeds, you can optionally do some manual testing on the resource itself, or even add a script that does this.

Release production

The production release starts with a gatekeeper (approval). When you are satisfied with the previous (test) resources, an approver can start the production deployment. All resources in the production resource group will be updated according to the ARM template. Try to run your deployment in Complete mode, because then you know that all resources in the resource group are the same as you defined in your Git repository. You are running an infrastructure as Code scenario.

Final thoughts

Setting up deployment pipelines for your ARM templates is an up-front investment aimed at giving you control over the resources that are deployed in your Azure environment. When the pipelines are running, changes to your Azure environment are fully controlled from the code, and all changes are traceable from VSTS. When you have two staged pipelines, you have an Infrastructure as Code scenario in which you are in full control over what is deployed into Azure.

This article is part of XPRT. magazine.

Get your free copy or download XPRT. magazine